Kelty Tent. Model 89034

RCI 2950 DX



Controls and Functions:



-

scanning function - Function SPLIT = half duplex enabled

- Ability to store 10 frequencies

- NB / ANL

- RF GAIN

- MIC / GAIN

- SQUELCH

- Clarifier

- SWR = controls the rate of stationary wave



- Roger Beep Switchable

- SHIFT = can not select

increment of 100 Hz , 1 KHz, 10 KHz, 100 KHz

or 1 MHz

- LOCK function allows = lock the frequency displayed

+ keyboard locking

- DIM = function adjusts the display lighting

(3 levels + OFF)

-Function RF PWR: You can adjust the power output

1W 25W in all modes of modulation: AM/FM- USB / LSB / CW. (AM: 1W to 10W - SSB: 10W to 25W)

external speaker jack, jack socket for PA and CW



General:



Frequency coverage: 24.890.0 24.990.0 MHz to 28.000.0 29.699.9 MHz to

Class of emission: USB, LSB (J3E) - CW (A1A) - AM (A3E) - FM (F3E)

Frequency Control: PLL Synthesized

Frequency Tolerance: 0.005%

Frequency Stability: 0.001%

temperature range for use Extreme: 0 ° to +40 °

Antenna Impedance: 50 Ohms

Micro impedance: 600 ohms, patch dynamics

Display: Digital LCD

Power: 13.8 Volts DC negative ground

Dimensions: Length 200 x Width 60 x Depth 265 mm



Sender:



antenna output power: 10 W: AM / FM 25 W: USB, LSB, CW

frequency noise: -50 dB

carrier suppression: -50 dB

Connector Antenna: UHF 50 (SO239)

Transmission Mode: USB, LSB, CW, AM, FM Receiver



:



reception for 10 dB signal / noise: AM - 0.5 Microvolts, USB , LSB, CW - 0.3 Microvolts; FM - 1 Microvolts

Intermediate Frequency: 10.7 MHz - 455 kHz

Sensitivity: 0.5 UV s signal to noise ratio of 20 dB

Image Rejection: 65 dB AGC

Figure: SSB / CW / AM: 80 dB for 50 microvolts for 10 dB change in output BF

Distortion: 10% to 500 million / Watts

Audio: 8 OHM - 4 Watts Maxi

Internal speaker: 8 ohm circular

output outdoor speaker: 8 ohm - 4 Watt Mini